Manual

PARTS LIST
Letter Description Quantity
A Telescoping Hoop Assembly 2
B Plastic Vertical Brackets 4
C Vertical Upright Tubes 2
D Wing Nuts 2
E Threaded Rod Assembly 2
F Support Foot Inserts 4
G Support Foot 4
H Screws 4
• Thank you for purchasing the WeatherTech
®
Pet Barrier. We are
confident that this product is the best on the market, and will
exceed your needs.
• Please take a moment to familiarize yourself with all of the
included parts listed below. If anything is missing, contact your
dealer immediately.
• The WeatherTech
®
Pet Barrier is easy to assemble. However, it
is a stepwise and orderly process, so be patient and take your
time. The letters in the instructions refer to the diagram.
F
D
E
C
H
G
A
B
Install the remaining 2 Support Feet (G) onto
the tops of the Vertical Upright Tubes (C).
B EFO R E Y O U B E G IN
YOU WILL NEED:
A phillips-head screwdriver
OUR GU A RANTEE :
This product is guaranteed against defects in manufactur-
ing for one (1) year from the date of original purchase.
Insert the Vertical
Upright Tubes (C)
through the Plastic
Vertical Brackets
(B) as shown.
1
There should be a Support
Foot Insert on each end of
the Threaded Rod
Locate the end of the Threaded
Rod Assembly (E) with the wing
nut. Press a Support Foot (G)
onto this end. Repeat with the
other Threaded Rod Assembly.
2
4
Insert the Threaded
Rod/Support Foot
Assemblies into
the Vertical Upright
Tubes. Make sure
the Wing Nuts (D)
center into the
Vertical Upright
Tubes.
3
Parts Included With the
WeatherTech
®
P e t B a r r i e r