Installation guide

18
16" Curved Blade Electric Fan
QRP60-034
16"curved blade electric fan can be
used as a pusher or puller. Requires a
17" x 2-3/4" mounting area. Includes
mounting tabs.
Outlaw Torque Absorber
QRP66-550
The all new Outlaw torque
absorber is specifi cally designed to meet the demands of
harder compound tires to provide the ultimate forward bite in
dry/slick conditions. The 3"biscuit has a smoother transition
producing up to 7500 foot pounds pull rate. With the four
biscuit compounds available, custom tuning to adjust to any
track conditions. Includes a red biscuit (2100 ft/lbs @ 1/2
inch travel) installed
฀
Part No. Description Price
QRP66-551 3 Inch Replacement Biscuit, Blue Extra Soft
QRP66-552 3 Inch Replacement Biscuit, Yellow, Soft
QRP66-554` 3 Inch Replacement Biscuit, Red, Medium
Roll Bar Switch Mounting Bracket
QRP66-945
The QuickCar panel mounting
bracket is designed for use with
1-5/8" roll bar tubing. Brackets fi t
most racing switch and gauge panels. Made
from high quality aluminum. Sold as a pair. Ignition
isnot included.
Suspension Rod Ruler
Measure nearly any suspension component fi tted with
rod ends, including suspension tubes, tie rods, etc. quickly
and precisely. Black powder coated ruler includes a locking
thumb screw and provides precise measurements up to 36
inches. Kit Includes adapters for 1/2", 5/8", and 3/4" rod
ends. Optional adapters allow measuring parts with 1/4",
5/16", or 3/8" rod ends.
Part No. Description Price
QRP66-100
Suspension Rod Ruler, with 1/2", 5/8",
And 3/4" Adapters
QRP66-105 Ruler Adapters 1/4", 5/16", 3/8" Kit
Intermediate Torque Absorber
QRP66-400
Track-proven to increase
forward bite out of the turns with sustained traction down
the straight away, QuickCar’s torque absorbers are IMCA-
legal, and are lighter than spring style units. CNC-machined
units feature internal brass bushing and grease fi ttings to
eliminate any possibility of bind, while the specially-threaded
cap allows easy biscuit changes. Uses three interior biscuits
and is 13" long.
Fuel Pressure Isolator
QRP61-300
Specialized isolator eliminates the hazards
associated with driver’s compartment mounted fuel pressure
gauges. Uses an anti-freeze/water mix on the outlet side to
the pressure gauge. Compatible with gasoline or methanol
fuels. Made from 6061-T6 aluminum anodized black.
Battery Cable Boots
QRP57-604
Used for covering battery terminals on small terminal bat-
teries or starter solenoid connections. Boots can be used on
up to 2-gauge cable. Sold as a pair (1) red and (1) black.
Battery Disconnect Boots
Protects battery disconnect terminals from
being accidentally shorted. Sold as a pair.
Part No. Description Price
QRP57-601 Red Disconnect Boots, Pair
QRP57-602 Black Disconnect Boots, Pair
Deluxe Sprint Gauge Panel
With Magneto Switch
QRP61-6005-1
Easy to mount, lightweight aluminum panel feature
QuickCar 2-5/8" diameter oil pressure and water tempera-
ture gauges. Panel includes a double pole mag switch, low
pressure warning light and 9-volt battery for self-suffi cient
power. Complete with Quick fasteners.
LED Bulbs
Replacement 12-volt LED bulbs for all
QuickCar gauge panels. Sold individually.
Part No. Description Price
QRP61-691 Red LED Bulb
QRP61-692 Blue LED Bulb
QRP61-693 Amber LED Bulb
QRP61-694 Green LED Bulb
$204.99 Each
$69.99 Each
$372.99 Each
$126.99 Each
$4.99 Each
$49.99 Each
$284.99 Each
$127.99
$6.99
$6.99
$5.99
$104.99
$5.99
$5.99
$30.99
$5.99
$127.99
$127.99
Phone: [phone] Prices Valid Through February 28, 2014
Blue Buzzard