Installation guide

6
Adjustable Metric Trailing Arms
Adjustable steel 1978-88 G-body metric upper and lower
rear end trailing arms are complete with left and right 3/4"
rod ends, step spacers reducing to a 1/2" hole and cut to fi t
stock GM type mounts. Upper arm aids in adjusting pinion
angle and centering rear end. Lower arm will adjust wheel
base.
Part No. Description Price
ALL57824 Upper, Adjustable Metric Trailing Arm
ALL57826 Lower, Adjustable Metric Trailing Arm
1978-88 Metric Front
Lower Control Arms
Reproductions of the originals, these
new arms are a direct replacement for
1978-88 metric chassis and accept stock ball joints.
Part No. Description Price
ALL57804 RH
ALL57805 LH
Black Aluminum Steering Disconnect
ALL52300
Disconnects allow easy
installation and removal of
three bolt style steering wheels
often used to enable entering
and exiting of vehicles easier. Quick
release aluminum steering wheel hub
mates to a steel coupler which is welded
to a standard 3/4" steering shaft.
Metric Rear Lower Trailing Arm
ALL57822
New, stamped steel,
C-channel arms are strong and
sturdy. Improve handling of the rear suspension on 1978-88
GM metric chassis by replacing twisted or worn out rear
control arms. Sold each.
Inner Axle Tube Seal
ALL72142
Seal is pressed into the outer end of a 5x5
axle tube snout (2.5") to help prevent differen-
tial lube from entering the outer wheel bearing
area and contaminating the wheel bearing
grease. Seal has an outer diameter of 1.875"
and an inner diameter of approximately 1.325".
High Performance 6-Valve Fuel Pumps
SB Chevy performance pumps have a clockable lower
base for rotation of fi tting locations.
Part No. Description Price
ALL40270 3/8" NPT, 6.5 To 8 PSI, 110 GPH
ALL40271 1/2" NPT , 7.5 To 9.5 PSI, 110 GPH
ALL40272
1/2" NPT Pump Delivers 12 To 16 PSI
And 130 GPH Flow, Requires Regulator.
Economy Tubing Notcher
ALL10411
Render precise joints for more consistent
welds and stronger cages. Notcher accepts
up to 2" diameter stock and automatically
aligns and centers tubing. Use in drill press
or with hand drill. Notches up to 45 degrees.
Upper Lower
$9.99 Each
$111.99 Each
$63.99 Each
$79.99 Each
$91.99
$91.99
$79.99
$79.99
$95.99
$95.99
$95.99
Phone: [phone] Prices Valid Through February 28, 2014
Blue Buzzard