Specifications

10
1SPEVDUT
/
FX
/
FX
BB Chevy Rectangular Port
Aluminum Cylinder Head
FloTek’s affordable rectangular
port head, available with 320cc
or 360cc intake volume run-
ners, offers 121cc combustion
chambers, 128cc exhaust run-
ners, 2.250", one-piece stainless steel intake valves, 1.880",
one-piece exhaust valves, high performance valve springs
(.600" lift hyd./fl at tappet cam) and 7/16" screw-in studs and
guide plates. Heads accept angle spark plugs and are sold
individually.
Part No. Description Price
FTC305505
BB Chevy 320cc Aluminum Cylinder Head
121cc, 2.25"/1.88" Assembled, Each
FTC407505
BB Chevy 360cc Aluminum Cylinder Head
121cc, 2.25"/1.88" Assembled, Each
LS1 GEN III
Aluminum Cylinder Head
FTC509505
FloTek LS1/GEN III cylinder
head offers affordability and
bolt-on performance. Accepts
all GEN III intake manifolds and
includes 210cc intake runners,
76cc exhaust runners and 60cc combustion chambers. The
one-piece stainless intake (2.020") and exhaust (1.570")
valves have a 5-angle valve job. Intake and exhaust seats are
hardened and the heads are fi tted with conical single bee-
hive valve springs good to .600" lift. PT Viton seals are used
throughout. Shipped, fully assembled and sold individually.
Aluma-Frame Front Suspension
DSE032050
Aluma-Frame suspension
system provides 6" of travel
for the ultimate in ride and
handling. Kit consists of
adjustable coil-over shocks,
torque tube style front bar,
tubular control arms, forged aluminum
spindles and a quick ratio power steering rack and pinion, all
integrated in an aluminum front frame section that bolts into
a 1964.5-1970 Mustang.
QUADRALink Rear Suspension
DSE041731
Kit replaces the 1964-1/2-1970
Mustang leaf springs with DSE’s
exclusive QUADRALink. Kit
includes a frame strength-
ening crossmember which
is also the coil-over shock
mount, Panhard bar and
chassis roll eliminator struc-
ture point.
Deep Wheel Tub Kit
with Frame Rail Sections
DSE040405
The DSE Deep Tubs inner wheel
housings accommodate wider
tire and wheel packages (up
to 335mm) on a 1964.5-1970
Mustang.
Subframe Connectors
DSE010105
DSE weld-in subframe connectors
increase chassis stiffness by con-
necting the front subframe to the
rear frame rails.
Rear Torque Box Kit
DSE010107
DSE’s rear torque box reinforcement
kit increases stiffness and improves trac-
tion for 1964.5-1970 Mustang.
Spindle Taper Machine Reamer
HOW84015
Designed for machine use to ream a
spindle properly and fast. The left
helical right cutting design reams
1.5" per foot taper.
Bump Stop Tech DVD
HOW89010
New DVD is produced by Tony Blanchard
of Race 101. It is the fi rst of a series to illus-
trate the basic principles and fundamentals
of using bump stop set-ups.
Phone No: (519-620-4664) - Prices Valid Through (December 21,2012)
$759.99 Each
$99.99 Each
$35.99 Each
$818.99
$818.99
Klotz Auto Repair
$6,500.99 Each
$3,000.99 Each
$400.99 Each
$190.99 Each
$95.99 Each