User's Manual

10
5.1.4 Transmitter module for Futaba T12FG, T14MZ, FX-30, FX-40 transmitters US version
(72 MHz)
Follow the instructions in para. 6.1.9. Inform about the frequency to be set under http://www.weatronic.com/en/downloads/cat_view/41-technische-
anleitungen.
If using the transmitter types T12FG, T14MZ you will require the adapter module with the part number WZ 6.FU5_72 and for transmitter models
FX-30, FX-40 the adapter module with the part number WZ 6.FU6_72 should be used.
5.1.5 Transmitter module for Graupner MC 24 transmitters
Remove the original telescopic antenna and open the casing. Remove the original HF module and screw the adapter stalk into the antenna mounting.
The weatronic adapter module is now fitted into the HF module mount and the connecting cable plugged into it. Fit the transmitter module to the
adapter stalk so that the LEDs are visible when viewed from the front. The plastic visibility window on the casing should now be removed to allow
you to route the connecting cable out of the casing, or, alternatively the cable may be fed out via a free external switch hole. Connect the connecting
cable to the transmitter module ensuring that both plugs are correctly seated and replace the casing.
5.1.6 Transmitter module for Graupner MX 22/JR 9X/JR10X/MX24S transmitters
Weatronic 2.4 Dual FHSS Transmitter module fitted to a Graupner/ MX 22 transmitter converted to weatronics Dual 2.4 MHz Dual FHSS
JR MX22 transmitter
Remove the original antenna and HF module. Screw the adapter stalk into where the original antenna was fitted and plug the weatronic adapter module
into where the original HF module was fitted to the rear of the transmitter. Plug one end of the connecting cable into the adapter module and fit the
transmitter module to the antenna stalk so that the LEDs are on the upper side (visible when looking at the front of the transmitter). The connecting cable
should now be plugged into the transmitter module.
Adapter stalk for the MC 22 For the JR 9X/JR10X/MX24S/JR12X Weatronic adapter module for JR/Graupner