User's Manual

4
1 Introduction
The weatronic 2.4 Dual FHSS family of products was designed in Germany by a team consisting of communication specialists and information
technology specialists. The results are highly sophisticated products based on the latest standards and electronic elements available. Highest quality
and reliability were the goals for these products. During the manufacturing process every units gets tested by a combination of optical and electronic
testing procedures. Development, manufacturing of the electronic print boards, housings final assembly are all done in.
All components of the weatronic 2.4 Dual FHSS RC-Systems are CE-certified and meet all the specs set by the EU (ETSI) as well as specified by the US
Federal Communications Commission (FCC). All components were vigorously tested in flight to all thinkable load cases. Operational safety and noise
immunity were the main goals during the development of this family of products. Please carefully read this instruction manual and the Installation
proposals thoroughly so that you can utilize the most out of the safety potential and the multitude of options that the 2.4 Dual FHSS RC-Systems
provide.
The Declarations of Conformity for the ETSI and FCC can be found at the website www.weatronic.com or www.weatronic-usa.com.
2 Scope of delivery
The scope of delivery of a 2.4 Dual FHSS RC-system including a Dual Receiver 2.4 Dual FHSS micro consists of:
• 2.4 Dual FHSS 12 channel transmitter module
• Mounting adapter (Disc fitting)
• Patch cable
• Adapter module for the intended transmitter (some come with a housing)
• Dual Receiver 2.4 Dual FHSS micro 8, 2.4 Dual FHSS micro 10 or 2.4 Dual FHSS micro 12
Optional accessories (not included in the basic package)
• micro-SD-card for the 2.4 Dual FHSS transmitter module
• USB-Mini-cable for connecting the transmitter module to your PC (only needed if programming of the receiver with the Giga Control
programming software is desired)
• USB-adapter cable for Firmware updates of the Dual Receiver 2.4 Dual FHSS micro
• Electronic ON / OFF switch
• Electronic Lipo ON / OFF switch with regulator in two versions
3 Safety instructions
The weatronic 2.4 Dual FHSS RC system is designed in particular for the operation of flying models and helicopters and as such is restricted for this
use only. Children under the age of 14 are only allowed to operate RC models under supervision of an adult. weatronic can not be held liable for any
misuse of the system.
3.1 On the airfield
Operate your RC-model only on dedicated RC model fields. Respect other pilots and arrange safety procedures with them. If several pilots
are operating models at the same time, be in close proximity to each other so that you can communicate and coordinate intended
operations such as take offs and landings to avoid accidents. Fly in the designated areas only. Do not fly over people and bystanders or
visitors.
The weatronic 2.4 Dual FHSS-System may be operated at the same time with other 2.4 GHz systems as well as with 35/72 MHz systems. There is no
frequency control needed for the operation of the 2.4 systems. Up to 120 weatronic 2.4 Dual FHSS-systems may be safely operated at the same time
without interference.
3.2 Range check
Always perform a range check prior to any first flight of a day. Also see chapter 6.6