Instructions / Assembly

ManualsBrandsWeb ManualsKitchenPlus 20 in. x 25 in. x 1 in. Adjustable FPR 4 Air Filter

This filter can also be installed in

wall & ceiling returns

Installation Instructions

To adjust your filter:

Parts list for filter

2 Inner Frame Channels

2 Outer Frame Channels

1 Filter Pad (Grey)

4 Locking Tabs

2 Plastic Grids

A: FRAME

NOTE: NO TRIMMING OF FILTER PAD OR

PLASTIC GRID IS NEEDED IF YOUR FILTER IS

20" x 25". Simply insert fasteners, then

proceed to section C, step 3.

Step 1: Adjust frame to your filter size. You

may want to use your old filter as a guide.

NOTE: Outside dimensions of filters are down

sized 3/8", (i.e.– 16" x 25" = 15 5/8" x 24 5/8".)

Step 2: Install locking tabs on 3 of the 4

frame sides.

B: FILTER PAD

Step 1: Trim plastic grid and filter pad to fit

inside frame. Measure by using tape measure

at left. (i.e.– If your filter size is 16" x 25" then

the outside dimensions of your frame should

be approximately 15 5/8" x 24 5/8". Trim filter

pad & plastic grid to 15 1/4" x 24 1/4".)

Step 2: Using durable scissors, cut each

individual sheet (Top Plastic Grid, Filter Pad,

and Bottom Plastic Grid) to size. Hint—Cut

one sheet at a time and use the first sheet as

a template for the other two sheets. Note: Both

sides of the filter pad are the same.

Filter Pad

Cut one sheet at a time

Plastic Grid is 1" x 1" square

Blower

C: ASSEMBLY

Step 1: Insert Top Plastic Grid, Filter Pad, and

Bottom Plastic Grid back into frame.

Note: Squeeze Plastic Grid and Filter Pad

together and insert into frame one side at a time.

Step 2: Enclose 4th side and insert remaining

locking tab.

Step 3: Now simply replace your old furnace filter.

Note: Both sides of the filter are the same. The airflow label is

provided for your consistency in using the filter.

Air Flow

Filter

Furnace or

Air Handler

Blower

The WEB Plus

Maintenance Instructions

Cleaning Frequency: The Web Plus filter should be

cleaned monthly to achieve best results. Cleaning

will avoid clogging, which can damage the filter and

cause equipment malfunction.* Your Web Plus

filter will conveniently provide you with clean air for

years if properly maintained.

Washing Procedure:

1. To clean, flush with a hose and force the water

through the filter. For areas of heavy dirt build

up and grease, soak the filter in a solution of

mild dishwashing detergent and water, then

flush with clean water thoroughly.

2. Shake out any excess water. Filter may be damp.

3. Reinstall the filter. Note: Both sides of the filter

are the same. The airflow label is provided for

your consistency in using the filter.

NOTE: Filter unit must be cleaned regularly using above instructions to

prevent damage to furnace/ac units. IMPORTANT: Do not vacuum filter

as damage to filter may occur.

*The WEB “Filter Cleaner,” a specially formulated organic cleaning agent,

is ideal for deep cleaning. Call 1-800-875-3212 for availability.

WEB Plus Adjustable

WEB Products, Inc

P.O. Box 3911

Kansas City, Kansas 66103

1-800-875-3212

www.webproducts.com

Made in USA

Summary of content (2 pages)

PAGE 1
WEB Plus Adjustable Installation Instructions Parts list for filter 2 Inner Frame Channels 2 Outer Frame Channels 1 Filter Pad (Grey) To adjust your filter: 4 Locking Tabs 2 Plastic Grids A: FRAME B: FILTER PAD NOTE: NO TRIMMING OF FILTER PAD OR PLASTIC GRID IS NEEDED IF YOUR FILTER IS 20" x 25". Simply insert fasteners, then proceed to section C, step 3. Step 1: Adjust frame to your filter size. You may want to use your old filter as a guide.
PAGE 2
WEB Plus Adjustable Instrucciones de instalación Lista de piezas del filtro 2 rieles de marco interiores 2 rieles de marco exteriores 1 almohadilla filtrante (gris) Para ajustar el filtro: 4 tachuelas de seguridad 2 rejillas plásticas A: MARCO B: ALMOHADILLA FILTRANTE NOTA: SI EL FILTRO ES DE 51x 64 CM (20 x 25 PULG.), NO ES NECESARIO RECORTAR LA ALMOHADILLA FILTRANTE NI LA REJILLA PLÁSTICA. Sencillamente inserte los sujetadores y prosiga con el paso 3 de la sección C.