Installation Guide

HARDWARE KIT CONTENTS
1 - Mounting Plate
2 -
3
/
8
inch x 2½ inch Lag Bolts
2 -
3
/
8
inch Flat Washers
2 - #8 x 2½ inch Painted Head Wood Screws
PACKAGING CONTENTS
HARDWARE KIT
QUICK START GUIDE
CHARGING STATION
CABLE HANGER
INSTALLATION TEMPLATE
TOOLS (not included)
1. Electronic Stud Finder
2. Drill
3.
1
/
8
inch Drill Bit
4.
7
/
32
inch Drill Bit
5.
1
/
4
inch Drill Bit
6. Carpenter’s Level
7.
9
/
16
inch Socket Wrench
8. #2 Phillips Screwdriver
9. Measuring Tape
10. Masking Tape
11. Push pin / Tack
Customer Support:
1-888-833-2148
1
2
3
1
/
8
in.
4
7
/
32
in.
5
1
/
4
in.
6
7
8
9
10
11
21325-76 Rev.1
CORPORATE HEADQUARTERS
AeroVironment, Inc.
[e-mail] ● www.avinc.com/evsolutions
© 2012 AeroVironment, Inc. All rights reserved.
AeroVironment, EVSE-RS Plug-in, EV Solutions, and the AeroVironment logo are trademarks of AeroVironment, Inc.
Corporate names, trademarks, registered trademarks, service marks, symbols, and logos stated herein are property of their
respective companies.
Specications are subject to change without notice. Images of the Charging Station Model EVSE-RS Plug-in are representative;
production models may vary.
No portion of these materials may be duplicated, used or disclosed without prior written permission from AeroVironment, Inc.
Disclaimer: This Installation Guide includes the latest information available at the time of printing. AeroVironment, Inc.
reserves the right to make changes to this user guide and/or product without further notice. Changes or modications to this
product not completed by an authorized service provider could void the product warranty.
INSTALLATION GUIDE