Installation manual

www.webasto.us 19 Webasto Product N.A., Inc.
Air Top 2000 S Exhaust Pipe
10. Exhaust Pipe
Rigid pipes of unalloyed or alloyed steel with a minimum wall thickness of 1.0 mm (3/64 in.) or flexible piping of alloyed
steel only must be used as exhaust line.
The exhaust pipe is secured to the heater using a clamping collar, for example. See the ‘regulations for installation’ for
other requirements.
The exhaust muffler should ideally be installed near the heater.
The heater may also be operated without a muffler.
Figure 19. Exhaust muffler - exhaust flow is non-directional (arbitrary)
Ø 6.5
0-90° 0-90°