Installation manual

www.webasto.us 27 Webasto Product N.A., Inc.
Air Top 2000 S Starting the Heater for the First Time
14. Starting the Heater for the First Time
After you have installed the heater, bleed the fuel supply system carefully.
NOTE: As a result of the low fuel consumption the heater must be switched on several times to fill
the fuel line and prime the system.
Conduct a trial of the heater to check all the connections for leaks and to ensure that they are secure. If the heater
suffers a fault during operation, the fault must be located and remedied.
14.1 Control Element Description
Figure 34. Control element
Control Element
Changes to the settings
on the control element
are implemented after
a delay.
!
Rotary knob for:
- Switching on and off
- Setting the room temperature
Resetting after a fault cut-out
-
Indicator / Error code display