Technical data

Air Top 2000 ST Electrical connections
61
The cable passage can be placed at either the left or right side.
To ensure that the cable passage in the control unit cover seals perfectly,
the cable grommet is to be adjusted appropriately on the wiring harness.
11.3. Supply voltage connection
Ideally from the vehicle’s central electrical system.
An additional blade terminal fuse holder is to be fitted to protect
the heater (supplied with the heater). The fuse holder may only be
installed in the interior of the vehicle.
Fig. 24: Remove the fastening plate on the fuse holder
Fig. 25: Fuse holder, installation position
F=15A
(12 and 24V)
AT2000ST_Installation_Instructions.book Page 61 Wednesday, May 29, 2013 12:54 PM