Technical data

Electrical connections Air Top 2000 ST

11.4. Control element connection

The wiring harness is prepared for connection to the control element.

Simply pull on connector housing to unplug the connector.

The connector housing can be locked (self-locking action) by simply pulling

on the wiring harness.

NOTE:

The fibre optic cable must be in contact with the rotary knob

NOTE:

As an option an external temperature sensor may be installed in the pas-

senger cabin (see page 50).

Fig. 26: Control element

Fig. 27: Installation of the control element

Fig. 28: Installation of the control element (incorrect)

AT2000ST_Installation_Instructions.book Page 62 Wednesday, May 29, 2013 12:54 PM