Unit installation

12
VW T5
Metering pump
Cut Mecanyl fuel line to length at installation
location of metering pump.
2 Metering pump
5 Rubber-coated pipe clamp
1 Silentblock, flanged nut
4 Hose section, 10 mm dia. hose clamps [2x]
6 Hose section, 10 mm dia. hose clamp
4 Remaining end of Mecanyl fuel line
3 Hose section, 10 mm dia. hose clamps [2x]
Preassem-
bling me-
tering
pump
Ensure proper installation position of meter-
ing pump, see "Installation Instructions“.
Installation location on left on strut before ve-
hicle fuel tank!
2 Preassembled metering pump
3 Flanged nut on silent block in existing hole
4 Original vehicle strut
1 Remaining end of Mecanyl fuel line
Installa-
tion loca-
tion of
metering
pump
Fuel line from heater unit on pressure side of
metering pump [side with connector].
3 Preassembled metering pump
1 Wiring harness for metering pump, single-
wire sealing [2x], tab connector, connector
housing
2 Fuel line from heater unit, 10 mm dia. hose
clamp on premounted hose section
Connect-
ing meter-
ing pump
15
21
5
3
6
4
16
3
1
4
2
i
17
2
1
3