Unit installation

15
VW T5
Exhaust system
Align exhaust pipe as shown.
Drill 2 mm dia. condensed-water drain hole at
lowest point in exhaust pipe.
Ensure sufficient distance to neighboring
components.
1 Exhaust pipe
2 P-clamp, 10 mm spacer sleeve, self-tap-
ping screw
Fastening
exhaust
pipe
Optional Exhaust Muffler
Installation of exhaust muffler as shown in
Figure 26 is not possible on a vehicle with un-
derride protection equipment!
1 Exhaust pipe
2 Underride protection
Exhaust
muffler
Remove p-clamp at position 2 again.
1 Exhaust pipe
2 P-clamp
Removing
p-clamp
Cut off exhaust pipe as shown in Figure and
mount muffler.
1 Exhaust pipe
5 Angle bracket, M6x20 bolt, flanged nut on
bracket
3 Exhaust muffler, M6x20 bolt, flanged nut
on angle bracket
2 Hose clamp [2x]
Installing
muffler
23
1 2
24
2
1
25
2 1
1 3
4
26
2 2
1