Unit installation

19
VW T5
Optional Recirculating Air
No underride protection is required for the op-
tion recirculating air mode!
1 Underride protection
Underride
protection
Lay air outlet on entrance trim on front pas-
senger side as shown; copy inside dia. and
hole pattern for fastening [3x] to trim. Remove
air outlet and drill 60 mm dia. hole in trim and
entrance on front passenger side.
1 Entrance trim on front passenger side
2 Air outlet
Installing
air outlet
Hole for fastening air outlet [3x] in trim.
Mount air outlet in trim and fasten with blind
rivets.
1 Entrance on front passenger side
2 Air outlet
60 mm dia.
hole in en-
trance
Remove protective grill at position 3.
Cut 60 mm dia. flexible tube 1 to length as
shown and mount on air outlet 3.
Seal off pass through at position 2 with Sicaf-
lex.
1 60 mm dia. flexible tube
2 Air outlet
3 50-70 mm dia. hose clamp
Following installation, seal off pass through at
position 2 with Sicaflex.
Installing
intake
hose
33
1
34
1 2
35
21
36
1 2
3