Owner`s manual

Page 10 of 20
Seat Heater System Wiring Schematic:
CARBONTECH™ Seat Heater Specification (290mm)
Heater Pads:
Size 645 x 290mm
Thickness 1.3mm
Heating Power 0.050 Watt/sq. cm @ 13.8 Volts
Total Heating Power 71 Watts @ 13.8 Volts
Electrical Resistance 2.67 Ohm +/- 10%
Electrical Current 5.17 Amps @ 13.8 Volts
Thermostat Bi-Metal switch: on at 40°C, cuts off
at 70°C
Wire Length 520mm +/- 10mm
Connector Tyco/AMP
Burn Rate <80mm/min. to FMVSS 302
Specification 2000/53/EG
Weight 0.094 kg
Content per Kit 2
Note: All data are valid for the non-trimmed heater pad.
Heater Element
Cushion
Heater Element
Back Res
t
Connectors
2-Pin / White
Relay
Connector
4-Pin / White
Switch
Ground
10A Fuse
Switched Ignition
Source
Fig 9