Owner`s manual

Page 11 of 20
Wiring:
Material PVC/Cu
Specification 2000/53/EG
ISO 6722
DIN EN 60684-2 (VDE 0341-2)
DIN EN 60352-2
DIN VDE 0298
Weight 0.033 kg
Content per Kit 1
Relay:
Type Change over relay
Continuous Rating 20 Amps @ 12 Volts
Short Time Rating 40 Amps @ 12 Volts
Voltage Drop (20 Amp) < 100 mV
Pressure on Contact > 100 grams
Tension of excitation < 10 Volts
Tension of misexcitation> 2.5 Volts
Current absorption < 170 mA
Mass Isolation 200 Volts eff.
Lifetime 100,000 times (2 sec. ON, 2 sec. OFF)
CARBONTECH™ Seat Heater Specification continued
Operating Temperature -40°C to +80°C
Homologation E3-7025 with Standard ECE 10R 02
Weight 0.030 kg
Content per Kit 1
Note: All data are valid for the non-trimmed heater pad.
Switch:
Type Rocker Switch
Circuit ON-OFF-ON
Operation Temperature -20°C to +85°C
Rating 20 Amps @ 12 Volts
Contact R Max. 50 mOhm
Insulation R Min. DC 500V 100 mOhm
Illumination Status: 2 Color LED, Green for Low
Red for High
Content per Kit 1
Approvals for CARBONTECH™ Whole System:
TÜV approved for European ECM Standard 72/245/EWG Version 95/54/Eg and for use in cars
with side airbags in seats.