Service manual

Webasto Diesel Cooker X 100 4 Failure detection
406
4.3 Failure blink codes
Yellow
Yellow
Yellow
0.125 s 0.125 s 0.125 s
0.125 s0.125 s 0.125 s
0.125 s 0.125 s 0.125 s0.125 s 0.125 s 0.125 s
0.125 s 0.125 s 0.125 s
2 s 2 s
2 s2 s
2 s 2 s
0.25 s 0.25 s 0.25 s
0.25 s ...
OFF
OFF
OFF
OFF
ON
ON
ON
ON
Glow plug
problem
Combustion
air fan
problem
Cooling
air fan
problem
Under-
voltage
Yellow
Yellow
Red
Red
Red
30s 30s0.125s 0.125s
0.25s 0.25s 0.25s 0.25s
0.125 s 0.125 s 0.125 s 0.125 s ...
OFF
OFF
OFF
OFF
ON
ON
ON
ON
Locking
after 2
unsuccessful
starts.
Overheat
Lights after
failure
signal
Opening the locking:
1. Switch the power ON (lock blinking).
2. Disconnect the main power cord (blinking stops).
3. Reconnect the main power cord (the yellow LED lights up for 1-3
seconds).
4. When the yellow LED has gone out, switch the power OFF.
The red lamp begins blinking when failure signal has lasted for 5
minutes.
Signal lights in case of malfunctions.
0.125 s 0.125 s 0.125 s 0.125 s