Service manual

Webasto Diese Cooker X 100 7 Maintenance and service
703
17: Device 17
9500
5500
11000
9500
1450
3000
240
DEVICE 17: Webasto Diesel Cooker X100
See Figures for the correct places for the jumpers.
7.2 Control unit settings
The parameters for several different devices have
been programmed on to the circuit card. Choose the
device / device parameters X1 by connecting the pair
of studs together with jumpers. It is extremely
important that the jumpers are in the correct places
so the devices work properly.
The parameters in the Figures are AI.xpd
parameters.
Make sure you always use the
latest parameters.