Technical data

Thermo 90 9 Repair
901
9 Repair
9.1 General
This section describes the repairs that may be performed
on the heater Thermo 90 when removed. Any further
disassembly will void the warranty.
For re-assembly only Webasto-authorised spare parts kits
ar
e to be used.
9.1.1 Work on Components afterDisassembly
CAUTION
All gaskets located between disassembled components
mu
st always be replaced and discarded.
9.1.1.1 Cleaning
• All disassembled components must be cleaned.
9.1.1.2 Visual Inspection
• Examine all components for damages (cracks,
d
eformation, wear, etc.) and replace as necessary.
• Examine connectors and wiring for corrosion,
loose contacts, wrong crimping, etc. and repair as
necessary
.
• Check terminals for corrosion and contacts for
se
curity. Repair as required.