Operation Manual

Operation via Fixed Network or Mobile Telephone
• Set your fixed network telephone to tone dialing (DTMF). You can find information
about this in the operating manual for your telephone.
This function is already configured for most mobile telephones.
• After ordering it from your telephone carrier, you have been assigned a separate
ThermoCall telephone number.
• Call the telephone number of your ThermoCall TC1.1. After the connection is
established, you will hear the greeting “WEBASTO THERMOCALL, WELCOME”,
followed by the prompt “PLEASE ENTER YOUR PASSWORD”.
Enter your password (2-digit code) and #. At the factory, the password is set to
“00” (00#). After a correct entry, the available commands are listed in an endless
loop or until the desired function is selected. If your entry is not correct or no
entry is made, you will hear the message “INCORRECT ENTRY” and the available
commands are repeated twice more. Afterward, the telephone connection is
disconnected. The existing menu structure automatically adapts to the current
status of the device.
Operation via Telephone
Function
Command
Press Key No.
Note
My ThermoCall TC1.1 telephone number:
ACTIVATE auxiliary heating
1
DE-ACTIVATE auxiliary heating / ventilation
1
ACTIVATE auxiliary ventilation
2
EXTEND OPERATING PERIOD for auxiliary
heating / ventilation
2
1
QUERY remaining operating period for
auxiliary heating / ventilation
3
1
ACTIVATE / DE-ACTIVATE internal preset
timer
4
2
QUERY CURRENT TIME
5
LOCATE VEHICLE POSITION 9
6
PROGRAMMING
0
3