Operation Manual

Programming

You can reach the programming menu by entering 0 in the main menu

CHANGE PASSWORD

1  new password

(2 digits)  # repeat new

password #

CHANGE OPERATING PERIOD for

auxiliary heating

2  2 or 3 digits

(10 -120 minutes) #

4 5

CHANGE OPERATING PERIOD for

auxiliary ventilation

3  2 or 3 digits

(10 –120 minutes)  #

4 5

PROGRAM CURRENT CLOCK TIME

4  2 digits (≤ 23 hours)

and 2 digits (≤ 59 minutes)

ACTIVATION TIME for auxiliary

heating

5  2 digits (≤ 23 hours)

and 2 digits (≤ 59 minutes)

ACTIVATION TIME for auxiliary

ventilation

6  2 digits (≤ 23 hours)

and 2 digits (≤ 59 minutes)

QUIT PROGRAMMING 0

Operation via Push-Button Switch

A Push-Button is included in the delivery. This must be installed if you have no

preset timer or Telestart and is used to activate and display the current operating

mode of your auxiliary heating.

Pressing the button repeats the last control function that was activated via

telephone. If the system is activated by pressing the button, this ends the current

heating or ventilation cycle

LED steady light Æ Auxiliary heating active

LED blinking slowly Æ Auxiliary ventilation active

LED blinking fast Æ Immediately after button is pressed