Installation manual

Installation
www.webasto.us Webasto Product N.A., Inc. www.techwebasto.com
14
Connection to Fuel Source
The fuel can be taken from the vessels fuel tank or a separate tank
Note:
Use supplied hose clamps to secure connections.
Fuel lines must be secured every 12” and kept away from hot exhaust and moving parts.
Since the lines cannot be routed with a constant rising gradient, the internal diameter must not exceed a certain size.
Air or gas bubbles will accumulate in lines with an internal diameter of more than 4 mm and will cause malfunctions if
the lines sag or are routed downwards. The lines should not be routed downwards from the metering pump to the
heater. Unsupported fuel lines must be secured to prevent them sagging. They must be installed in such a way that
they cannot be damaged by flying debre and high temperatures (e.g. exhaust line).
CAUTION
Only use a tank connector if the
fuel tank is made from metal
Fig. 9 Fuel Standpipe