Technical data

DBW 2010 / 2012 / 2020 / 2022 / 300 / 350 2.The General Definition
209
2.7 The flame regulator
The flame status will be supervised with the flame
regulator during the entire combustion action. The flame
regulator in the non-sensoric types photo-resistance or is
photo-transistor at the sensoric types and reacts
according to the illumination power of the flame.
The signals will be conveyed to the control device and
processed here.
2.8 The induction bobbin and ignition
electrodes
The induction bobbin produces the high voltage that is
necessary for the ignition of the fuel-air combination. The
ignition will be achieved with the high voltage spark
between two ignition electrodes.
2.9 The heat sensor
The heat sensor specifies the temperature of the cooling
water as electrical resistance at the exit of the heat
exchanger. This signal will be conveyed to the control
device and processed here.
The ignition electrodes
The flame regulator
The flame regulator in the control device 1553
The flame re
g
ulator in the control devices 1563 / 1564 of
the sensoric heating devices
The i
g
nition
electrodes
The flame regulator
The i
g
nition
electrodes
The flame regulator