Operation Manual

webcamXP"5.5"documentation"
" @"50"@" "
6.1.3 Settings
To edit general settings for the motion detector, select the Settings tab. The full Settings tab is shown below:
The following options are available in the Settings tab:
 Recording Duration: Enter into this text box the number of seconds you wish the motion detector to
record video once an event is tripped (e.g. a motion is detected). This option is only applicable if you
enable Record Movie, in the Enabled features box (see the section titled Enabling Features).
 Minimum interval between 2 alerts: Enter into this text box the minimum number of seconds you
wish webcamXP to wait after one event before listening for the next one. Therefore, if movement is
constant, events will trip in even intervals based on the value you enter into the Minimum interval
between 2 alerts textbox.
 External sound file (.WAV): Select in this file a WAV audio file you would like webcamXP to play
when an event is tripped. Click the ... button to the right of the textbox. A standard Windows Open
dialog will appear. Navigate to and select a WAV file to play. Click the Open file.
Please note that the motion detector must be switched off to be able to modify those values, the fields are
grayed out while the motion detection is in progress for this source.