User manual

USER MANUAL OF WEBEE WIRELESS N ROUTER Version:1.1

Firmware Type 2

P/N: 60291092

4.3.14 WAN Interface Setup

This page is used to configure the parameters for wide area network that connects to the

WAN port of your Webee Router. Here you may change the access method to Static IP,

DHCP, PPPoE , PPTP L2TP or GSM 3.5G by click the item value of WAN Access

Type.

Static IP

Item Description

Static IP Click to select Static IP support on WAN interface. There are IP address,

subnet mask and default gateway settings need to be done.

IP Address If you select the Static IP support on WAN interface, fill in the IP address

for it.

Subnet Mask If you select the Static IP support on WAN interface, fill in the subnet mask

for it.

Default Gateway If you select the Static IP support on WAN interface, fill in the default

gateway for WAN interface out going data packets.

MTU Size Fill in the mtu size of MTU Size. The default value is 1500

DNS 1 Fill in the IP address of Domain Name Server 1.