EG-1 COFFEE GRINDER INSTRUCTION MANUAL Copyright 2022 Weber Workshops ®, manual version 2.
table of contents what’s inbox | parts list 1 eg-1 part names 2 quickstart | basic usage - first steps 3 - attaching shaker platen/portafilter rails 3 - adjusting rpm 4 - powering on/off 4 - adjusting grind settings 4 - cleaning 5 - sleep & power off 5 warnings & safety information Copyright 2022 Weber Workshops ®, manual version 2.
inbox | parts list 1 inside the EG-1 box you will find the following: Blind Shaker main unit bean dish Body Plug Cap bean dish Shaker Platen blind shaker shaker wood platen shaker pad Option Portafilter Rail System power cord (us-style) * can use any C13 (computer) cable in your country spare wipers - 3 sets Rail Ring shaker pad rdt bottle Copyright 2022 Weber Workshops ®, manual version 2.
eg-1 part names 2 motor cap motor casing bean dish motor mount reach around arms locking ring neck driver box upper funnel bottom bearing mount base rail cover rpm display purge button rpm knob on/off button Copyright 2022 Weber Workshops ®, manual version 2.
quickstart | basic usage 1 - Grinder Placement. Find a flat, dry counter space with access to a power outlet. The EG-1 is made to be usable in 90v ~ 240v regions without the need for a separate transformer. It uses a C13 style cable (like as a computer) that can be purchased locally as needed. A US-style 3 prong cable is included inbox. 3 4 - Mount the Shaker Wood Platen Rail. The PF Cover is removed (as shown). We recommend starting with just the wood platen to accommodate the Blind Shaker.
quickstart | basic usage 5 - Plug in unit. Use the included power cord. You may need an adapter or another C13 style cable for your country, but a transformer should not be needed as it works anywhere with a 90v-240v AC supply. 6 - Power on mains. This is the switch on the back of the unit next to where the cord plugs in. The display should read "0" 7 - Adjust the RPM level. Turn the black knob counterclockwise to reduce to the 500-700RPM range (a good starting point).
quickstart | basic usage 5 11 - Grinding Coffee. When you are dialed into your grind size, you can dump your coffee dose into the Bean Dish. You may use either a "Hot Start" where the grinder is on/spinning before the beans are introduced, or a "Cold Start" where the beans are added before turning the grinder on. We typically recommend using a Hot Start when operating the EG-1.
warnings and safety information The EG-1 Grinder is for professional use and should only be used by trained /qualified personnel. Minors or small children should not be allowed to operate or play with the machine. Misuse of the grinder or use other than intended may result in serious injury or death. Before servicing, inspecting, or cleaning the grinder, unplug from mains electricity.
electrical specifications product name: eg-1 coffee grinder model number: eg-1 v3 rated voltage: 90-240V frequency: 50/60Hz power: 385-315W Copyright 2022 Weber Workshops ®, manual version 2.
electrical certifications (CE) Copyright 2022 Weber Workshops ®, manual version 2.
electrical certifications (CB) Copyright 2022 Weber Workshops ®, manual version 2.