Instructions / Assembly

WWW.WEBER.COM
®
23
4
2
3
MAINTENANCE
REPLACING MAIN BURNERS
A) Your Summit
®
gas grill must be off and cool.
B) Turn gas off at source.
C) Disconnect gas supply.
D) Remove cooking grates.
E) Remove Flavorizer
®
bars.
F) Remove smoker box (if included with your model).
Remove Control Panel
Tools needed: Screwdriver and a towel.
A) Remove burner control knobs (1).
B) Open both doors. With a screwdriver, remove screws from the underside of control
panel (2).
C) Place a towel on the top of the right door assembly.
This will protect control panel and door assembly from getting scratched on
next steps.
D)
Tilt bottom of control panel forward and lift up and away from the grill (3) .
E) Fully open right door. Place control panel on floor, leaning against towel covering
right door assembly (4).
Remove Burner Tubes
Tools needed: 3/8" nut drivers.
A) Using a 3/8" nut driver, remove the screws that secure manifold assembly to the
cookbox. Pull manifold assembly away from burner tubes and let it hang loose from
grill cabinet (5).
B) Pull the selected burner tube(s) through the front of cookbox and replace with new
burner tube(s) (6).
6
7
5
6
The grills illustrated
in this Owner’s Guide
may vary slightly from
the model purchased.
1