Installation Guide
Table Of Contents
- Installation
- Addendum
- Important Safety Notices and Warnings
- Prohibited uses
- CE mark and Radio Equipment Directive for LINK 240
- FCC information for the user
- Specific Absorption Rate (SAR) compliance
- Environmental and Battery information
- Triman logo
- Operating temperature
- WEEE – e-waste disposal
- How Webfleet Solutions uses your information
- Exposure limits
- Technical Specifications
- Model numbers
- Responsible party in North America
- Customer support contact
- This document
- WEBFLEET Telematics Service Platform
- Accessories supplied with this device
- Terms and conditions and Limited warranty
- Copyright notices
- Webfleet Solutions Limited Warranty
Configuring the LINK 240 for fuel
consumption reporting
Important: For fuel consumption reporting your must have ECO subscription booked for your LINK 240 de-
vice.
You can configure your LINK 240 for fuel consumption reporting using WEBFLEET or the LINK Toolkit app.
Configuration via WEBFLEET
1. Log in to WEBFLEET.
2. Click the vehicles icon in the main menu to show the Vehicles view.
3. Select your vehicle from the list.
The vehicle details panel opens.
4. Click the Details button.
5. Go to the Device Configuration tab.
6. Click Edit.
7. Go to the Fuel reporting section.
In the fields for Engine size (cc) and Power (kW), enter the size in cc and the power in kW of the en-
gine of your vehicle.
Important! Make sure you have entered the correct engine size and power, as this information is the
basis for the calculation of the fuel consumption of your vehicle.
8. Select if malfunctions detected by the vehicle diagnostic system should be reported.
9. Click Save.
Configuration using the LINK Toolkit app
1. Download the latest version of the LINK Toolkit app and install it on your phone.
2. Open the LINK Toolkit app.
3. Enter your user name and password and tap Login.
4. Select the LINK 240 device type.
5. Scan the QR-Code of your LINK 240.
The LINK Toolkit app shows the status screen for the selected LINK 240 device.
Important! Make sure the LINK 240 device shows the status Activated.
6. Tap the + button.
7. Select Configuration.
8. In the field for Activation code, enter the contract activation key.
9. Tap on the check mark button to confirm.
The Configuration view is shown.
10. In the Fuel reporting section, enter the power in kW and the size in ccm of the engine of your vehicle
in the fields for Engine power (kW) and Engine size (in ccm).
10