Installation Guide
Table Of Contents
- Installation
- Addendum
- Important Safety Notices and Warnings
- Prohibited uses
- CE mark and Radio Equipment Directive for LINK 240
- FCC information for the user
- Specific Absorption Rate (SAR) compliance
- Environmental and Battery information
- Triman logo
- Operating temperature
- WEEE – e-waste disposal
- How Webfleet Solutions uses your information
- Exposure limits
- Technical Specifications
- Model numbers
- Responsible party in North America
- Customer support contact
- This document
- WEBFLEET Telematics Service Platform
- Accessories supplied with this device
- Terms and conditions and Limited warranty
- Copyright notices
- Webfleet Solutions Limited Warranty
Preparations
Activating the LINK 240
You can use the LINK Toolkit app which will guide you through the activation process of your LINK 240 de-
vice.
Make sure you have the following:
•
The Contract Confirmation letter including the Activation Code.
•
A device with internet connection that is able to scan QR codes, has the LINK Toolkit app installed and
the necessary LINK Toolkit login credentials.
•
The QR code of the LINK 240 that you can find on the device label or on the addtional QR code label.
In addition to the LINK Toolkit app you can use an online installation tool to activate the LINK 240. To go
there please scan the QR code of the LINK 240 that you can find on the device label or on the additional la-
bels provided with the device. If login credentials are needed for the online activation tool, please contact
Webfleet Solutions or your fleet manager.
Note: If the LINK 240 QR code cannot be scanned, the LINK Toolkit app as well as the online installation
tool also support the activation of the LINK 240 using the device serial number and the device activation key
(DAK), which you can also find on the QR code labels.
Choosing the correct position
First you need to choose the correct position in which to install your LINK 240.
Take the following into consideration:
•
Do not expose the LINK 240 to direct sunlight and/or high temperature for long periods to ensure prop-
er operation.
•
To ensure GNSS reception using the integrated GNSS receiver, the top of the device must not be ob-
structed by metal items.
•
To ensure mobile network reception using the integrated antenna, the device must not be placed on or
surrounded by metal items such as the vehicle’s coachwork closer than 5 cm (2 inches) and the top side
must not be obstructed by metal items.
•
If the OBD-II connector of your vehicle does not provide enough space to insert the LINK 240, you can
use the OBD-II extension cable from Webfleet Solutions.
•
If the OBD-II extension cable is used, make sure it is firmly fixed so it cannot interfere with the driver's
actions.
8