User manual

7
KELVIN, R-GAIN and B-GAIN value.
CHROMA
(10, 0~20)
Adjust Chroma level.
IMAGE
SHARPNESS
(5, 0~10)
Adjust sharpness. The higher value will show more
clear video image
H-MIRROR
Mirror image. Left and right will be reversed
V-MIRROR
Flip image. Up and down will be reversed.
Digital ZOOM
Zoom image by 16 steps. (1~16)
PRIVACY
This is for privacy zone masking
- ZONE NO : Supports total 28 areas (0~27)
- ZONE OP : Whether to use or not of selected area
- X, Y-POS : Set the X,Y start position of an area
- X, Y-SIZE : Set the width and height of an area
- COLOR(WHT,YEL,CYN,GRN,MAG,RED,BLU,BLK) : Select
color for masking.
- TRANS(0~4) : Set transparency of masking.
SHADING
DET
Before execute the SHADING function, shoot a white
paper in front of the camera, and do SHADING DET. If
not, abnormal video might be output.
SHADING
It compensates the difference of light caused by lens.
To use this function, you should run Shading DET
function first at System menu.
WDR
This 3D backlight compensation function allows bright and dark area to
be seen clearly together.
- WDR WGT(0~4) : Select image mix ratio. The higher value, the bright
part of the image appear more clearly
BLC
Back light compensation function.
- BLC LEVEL(LOW, MIDDLE, HIGH) : Set BLC level.
- BLC OSD : Displays BLC area on the screen.
- BLC POS-X, Y : Set X, Y start position.
- BLC SIZ-X,Y : Set Width and Height size.
- MASK : If there is very bright portion inside BLC area, this portion can
be removed from the calculation of BLC compensation. This brightness
level for masking can be decided by below MASK LEVEL.
- MASK LEVEL(0~10) : Set brightness level for Masking.
HLC
High Light Compensation. If there is very bright portion inside a scene,
camera can mask the portion, and the portion is removed from the
calculation for exposure control.
- LEVEL(5, 0~10) : Set the brightness level for masking.
- Color : Set masking color
ACE
Adaptive Contrast Enhancement. Enhances image quality by raising the