User manual

8
(ON, OFF)
brightness of dark areas.
DNR
(LOW, MIDDLE, HIGH)
Reduce image noise under low light condition
FRAMERATE
(25Hz, 30Hz)
Power frequency 60Hz(NTSC) : 30Hz(fps) video output
Power frequency 50Hz(PAL) : 25Hz(fps) video output
SYSTEM
MODEL
Displays model name
CAM ID
Max. 8 digits for camera name.
Supports alphanumeric and some special characters
RS485 ID
Set ID for RS485
VERSION
Displays firmware version
RESOLUTION
Set output resolution (1080p/720p).
DIGITAL OUT
/
IR-LED
Provides control signal output for sub light which is
synchronized with image process.
- DURATION(0~20) : Set the one cycle duration of TTL
signal output (unit : msec)
- POLARITY : Set the output level of TTL signal.
(0 : 0V , 1 : 3.3V)
* Output cycle is decided by 30Hz/25Hz.
BAUDRATE
(9600, 57000)
Set RS485 communication speed.
RESET
Makes all setting values to factory default condition
EXIT
SAVE&EXIT
Save configuration and exit menu.
EXIT
Without saving configuration, exit menu.
If there is no further action in menu, after 1 minute,
OSD menu will exit without saving changes.
Product Specification
Model
C1080BL-IR48-AF / C1080BL-IR18-AF
Video
Sensor Type
1/3” 2.1Megapixel CMOS
Total Pixels
1920(H) x 1080(V) = 2.1M pixels
Scanning System
Progressive Scan
Min
Illumination
B/W
0.0005Lux@50IRE, F1.2, 3100K, DSS(OFF), AGC(10)
Color
0.2Lux@50IRE, F1.2, 3100K, DSS(OFF), AGC(10)
Lens
Lens
DC 3 ~ 10mm F1.3
type
DC Auto Iris
Video Output
Output
1(BNC 1.0 Vp-p, 75Ω)
Resolution
1080p 30fps / 25fps
HD-SDI
SMPTE 292M compatible