User guide

3. Lift HDD bracket to a direction shown in the right picture and

separate from the bottom.

4. Place HDD in a HDD bracket and fasten 4 screws on each side.

5. Place HDD bracket fastened with screws in DVR and fasten it on

the bottom with screws.

<Note>

Below is SATA cable socket sequence of a mainbaord.

Up to 5 HDDs can be installed inside DVR.

Main Board

Disk Manager

INT A

INT B

INT C

INT D

INT E

eSATA

Adding HDD

Remove the power cord before installation to protect DVR against possible damage and an electric shock

Please call the store you purchased the product from if it isn’t operating correctly due to installation or

configuration mistakes.

 Warnings regarding Data loss

Please handle with care so HDD data isn’t damaged.

Check HDD compatibility before installing additional HDD.

Be careful not to give any shock on HDD during operation which could lead to possible damage or malfunction

 Cases when HDD and its data can be damaged.

To minimize the data loss, please copy data as often as you can.

Physical shock during disassembly or installation may lead to Data damage.

Sudden power outage or turn off of DVR can damage HDD.

Please don’t try to move or shock DVR while HDD is working.