User guide

23
Connecting other devices
Basic connections
Connecting a monitor
Check monitor resolution and connect to DVR.
 HDMI Port : 1920 x 1080p
<Note>
Only connect cameras that support HD-SDI standard.
We strongly recommend using HDMI certified cable when connecting to DVR.
Connecting a Camera
Use recommened coaxial cable to connect HD-SDI camera to DVR as shown in the picture.
Only cameras with 1080p resolution can be used. Other resolutions are not supported and channels with
resoultions Webgate camera doesn’t support will not be recorded.
PoC camera
Connect PoC camera & PoC adapter to DVR to supply power to PoC camera through coaxial cable and no
additional power supplies are required. And PoC camera can be controlled using the DVR CoC function
through coaxial cable without additional RS-485 cable.
Recommended cable *
* Depends on manufacturer and models.
<warnings>
 Transmission distance will be affected by cable types and installation site environment
Cable Type
HD-SDI transmission
distance
Use
5C2V
about 90M
Analog signal
4C-FB(T), 4C-HFB(T), RG59
about 140M
High-foamed cable, double or triple
shielded cables are recommended
5C-FB(T), 5C-HFB, L-6CHD, RG6
about 180M
HD-SDI cable
5C-HFBT
about 200M
HD-SDI cable