User guide

26
Connection method
Connect the trimmed wire to terminal block
Performance
Available input
pulse range
Minimum 500ms
Output current
Standard DC 12mA
Connecting sensor input terminal
Please see the picture for sensor input. The below picture is an example of connecting Dry Contact sensor type.
Please refer to “Wire Handling” for more information.
Connecting relay
specifications
Please see the below table for alarm output requirements.
Specifications
Output Ch.
4ch relay output
Output type
Dry Contact
Connection method
Connect the trimmed wire to terminal block
Performance
DC
30V / 1A
AC
125V / 0.5A
Connecting relay
Please refer to the below picture in regards to connecting R1~R4 output. Below picture is an example of
connecting a light bar. Please see “wire end handling” in regards to connecting/removing wires.
Connecting COM1 serial port with external devices
Connecting Text input device (ATM / POS / Access Control)
Using COM1/RS232, TEXT DATA can be recorded with synchronizing POS/ATM.