User guide

The below diagram represents configuration of multi DVRs with PTZ(DOME). To control PTZ(DOME) using

keyboard, please select DVR ID then select camera for control.

control device

connection device

Keyboard (Master/Slave)

All DVRs can be controlled, all PTZ(DOME) can be controlled

DVR

PTZ(DOME) directly connected to DVR can be controlled

Slave 1

Serial Cable

Video Cable

Slave 2

Slave 255

Master

DVR 255

DVR 1

DVR 2

DVR 3

DOME 1 DOME 2 DOME 16

COM2 COM3

Confituration using 1 serial ports

When using 1 serial port, user can connect both of PTZ(DOME) and Keyboard to a port, and user can select a

PTZ(DOME) through the keyboard. According to DVR’s COM port setting, connected controllable device can be

selected, and by choosing a DVR ID, keyboard can control several DVRs.

In case PTZ(DOME) is setup on DVR COM port, user can use it as follows.

Control device

Connection device

Keyboard (Master/Slave)

All DVRs can’t be controlled/ All PTZ(DOME) can be controlled

DVR

Only PTZ(DOME) directly connected to DVR can be controlled

In case Keyboard is setup on DVR COM port user can use it as follows

Control device

Connection device

Keyboard (Master/Slave)

All DVRs can be controlled, All PTZ(DOME) can be controlled

DVR

All PTZ(DOME) can’t be controlled