User guide

32
Recording configuration
[continuous recording] [manual recording] [schedule recording]
Continuous recording
Continous recording will automatically begin after the booting is completed and continous/event recording will
begin according to the chosen program values.
Manual recording
Push REC button on the front to begin/end manual recording and manual/event recording will begin according
to the chosen program values.
<reference>
If manual recording is chosen, exit menu and check the manual record indicator on the status bar to confirm recording.
If there is no manaul recording indicator sign, press REC button on the front to begin recording.
schedule recording
Schedule recording will begin according to a pre-set day/time
schedule.
Set day/time on “ schedule setting” under the schedule recording mode.
Program configuration
Please set resolution, frame rate, and picture quality of each individual
camera per channel in “Program menu” under the record setup.
<Reference>
How to check if it’s recording : If set correctly and is recording, “REC LED”
indicator on the front will be flickering. Also, status bar’s save indicator
will show [SCHEDULE], [MANUAL], or [continuous] indicating that all
channels are recording. “REC LED” is turned off when it isn’t recording.
menu  recording  recording
Menu  recording  program