User guide

35
Network configuration
Ethernet
Click Ethernet for type and enter given IP, Netmask, Gateway, DNS.
xDSL (PPPoE)
Change Network menu type to xDSL then go to xDSL menu.
Enter ID and Password assigned from PPPoE registration on xDSL menu.
Connection confirmation message will appear when xDSL connection is secured.
DDNS
If DVR is using dynamic IP, use DDNS function to get domain name to access to network regardless of IP
change. Enter domain name on DDNS menu. For more information, please go to WNS(www.mycam.to),
Webgate’s DDNS service website.
WRS
If DVR is using dynamic IP, use WRS service to automatically find the product IP to access. Configure GROUP
ID to activate WRS function. Us GROUP ID or SN to Search product in CMS and it is recommended to create
an unique GROUP ID configuration to avoid GROUP ID duplication.
Remote control ID configuration
When operating more than 1 DVR, it is possible to manage many DVR
with one remote control by giving different ID to each and every DVR.
A remote control can have maxium of 255 IDs and if users want to use
every ID, then select ALL.
Select and control DVRs that have different ID with one remote control.
Selecting remot control ID
1) Point a remote control at DVR and press ID on the remote
control.
2) Press ID on the remote control shown on the screen of DVR.
3) Press again ID on the remote control to complete the selection.
menu  network  network
menu  system  tool