User guide

45
configuration
system configuration
Please set time/disk/authority.
date/time
Set the product time in order to set recording settings.
It is very important for DVR to have the right time zone in which it
is used for protection of recorded videos.
Default time zone is set at ‘UTC 00:00 Dublin”.
Time settings
<note>
Under recording, if a user changes time when it is already recording(saved in HDD), it will change the time of the
previously recorded videos. Moreover, there will be a history of a time change on the system log.
Standard time zone
Set the timezone to the location a product is used in
daylight saving (DST)
This menu is synchronized with time zone configuration menu. It means only when daylight saving area is on,
this function works. Daylight saving applicable area is the same as with Microsoft Windows time zone. Users
can select whether to apply daylight savings or not when DVR is installed in Daylight saving applied zone
Date format
Date display settings. Select one of “yy/mm/dd”, “mm/dd/yy”, “dd/mm/yy.
Save changes
To apply the canges made for date/time, click “date/time apply” button.
<warning>
Other configurations except date/time save automatically, but “date/time”
configuration doesn’t save automatically since it can critically affect HDD recording file system.
To apply the changed value, user must click [date/time apply] button
menu  system  date/time