User guide

49
User settings
DVR users will either be manager or user. Managers can use all
functions of DVR without limitation and can set up user settings. Up
to 10 users can be registered and each user can only use functions for
which they’ve been given access to.
Channel Rights
A manager has an access to every channel.
A manager can give access to channels to each user.
Function access
“Admin” has the rights to all the functions.
The action rights to each function(Playback/Search, Menu, Copy, PTZ,
Camera setup, Manual Relay, Power off, Network MIC) can be given by
each user.
ID & password change
For User 1~10, max 20 and 8 characters are allowed for ID and
Password.
<reference>
Default manager Password is “12345” and for user 1 ~ 10, password will take a
pattern of “11111” for user 1, “22222” for user 2 and so on. So user 10 will
have a password of “00000”. To enter 0, press “10” on the front panel.
Additional User Setup
• Auto Login On: Select a user that can be automatically logged in
when booting.
• Auto Login Off: Login popup will show up when beeting. Video can
be monitored after login.
• Auto Logout On: If there is no control of DVR during the selected
interval, DVR will be automatically logged out.
• Auto Logout Off: Auto Logout will not work
menu  system  user settings