User guide

utility

Utility sets up DVR name, remote control ID, and language.

DVR alias

Set the DVR alias when connected to network.

language

select a language for a system.

DVR keyboard ID

This menu sets the address of keyboard when using all functions of

DVR by keyboard. default value is “1”. If user wants to control various

DVR by one keyboard, its address should have different value. If

designated address is configured the same as keyboard, user can

control DVR function.

Remote control ID

Can set up max 255 remote control and all can be managed with a single remote control.

Firmware upgrade

Can update firmware by USB Memory stick

Steps for USB upgrade

1) Put firmware file into USB memory and insert it into DVR

2) Select “Firmware update” button

3) Select “Yes” to the popup “Upgrade firmware from USB disk?”

4) DVR will reboot automatically.

5) Firmware upgrade completed

System log

System log shows the log list of system booting, user login, setting

changes. User can scroll the list using up and down buttons on the

front panel.

Factory reset

Change all set up values to default values.

Only a manager can use this function.

Only a DVR system manager can use this function.

Refer to the (supplement – factor default value) for the factory reset.

menu  system  utility