User guide

Device settings

In Device setup, user can configure camera, monitor, audio, text, serial which are connected to DVR.

Camera

At this menu, user can assign [camera name], and set each camera to

use or not to use.

If the operator do not want live monitoring and recording for the

video connected channels, the channels must be set as nonuse.

PoC Status*

Check the status of PoC camera & PoC adapter that are connected to

DVR.

Reactivation

If there is an overcurrent in a channel to which PoC camera is

connected, “thunder icon” will be displayed on the channel and will

automatically shut off the power. Press reactivation to supply power

after resolving an overcurrent problem.

Reactivation button will only be shown when there is an overcurrent

and is hidden under normal settings.

PTZ

Port

Choose one of COM2/COM3/CoC*.

Device

Select a device that is connected to the port.

Address

Select the device’s address that is connected to the port.

Baudrate

Select the device’s baudrate that is connected to the port.

* Please refer to page 5 for PoC/CoC

menu  device  camera

Menu  Device  PTZ