User guide

62
E-Mail Configuration
Recipient Address
Input E-mail address with receiver’s E-mail info.
E-mail format should be [e-mail] and the users must only use
combination of numbers and the English letters
Sender’s E-mail address
Sender’s E-mail address is set when user use E-mail for output
selection and user setup E-mail address as [e-mail].
Picture attachment
When sensor, motion detector and video loss occur, relevant event
info with channel video will be sent to an e-mail. Only system event
info will be sent for system event.
Authentification
There are a few ways to send email (No authentification, SMTP server authentification and TLS authentification.)
• No authentification: sends email to the recipient address without server authentification
• SMTP authentification: sends email to the recipient after SMTP server authentification. The recipient address
must support SMTP authentification
• TLS authentification : sends email to the recipient after TLS server authentification.
FTP Configuration
The DVR sends 1 video image per event to a FTP server when an event
occurs.
<warning>
Since FTP just transmits an image, if there is no image system event, it is not
supported.
Server URL
Enter the FTP server address to send image
user ID
Enter the relevant ID when asked for FTP server authentication.
password
enter FTP server password.
FTP Directory
Select Folder to save image
If folder is not indicated, the image is sent to the folder which server selects