User guide

65
Schedule recoding
It records according to the programmed schedule automatically.
select “Schedule record” and configure day and time
Check and select each program default value and select one of 9
programs from A to I. User can not set two different program to one
schedule.
Configuration
Configure a program, time on a date and the info will automatically
be displayed on the graph.
If select recording start/end time the table and click them in order
and the corresponding info will be displayed
• Program : Set recording program(A~I)
• Time : Set time to apply
• Registration : Schedule registration
• Delete : Delete a schedule
• All Delete : Deletes the all schedules
deletion
Select items and click Delete button
If clicking delete button without item, previously selected item will be deleted from the latest time order.
Clicking All Delete makes all schedule deleted.
<warning>
When configuring time sector, previously configured time can not be included.
Event recording
Event recording is a recording via “sensor”, “motion detection”, and “text” input.
To perform event recording, frame rate and video quality per program need to be set at program settings. By
default, event recording synchronizes with 3 recording modes, continuous recording, manual recording and
schedule recording.
<reference>
If user wants to use Event recording only, please, set frame rate as 0fps and enter frame rate for Event recording.
Event applied time
To make event record user needs to setup record time for pre and post event. Event record range will be set
based on time set by user.
Record time before event
User can select between 1~5sec and time ahead of event will be recorded as much as time set by user.
Record time after event
User can select between 1~30mins and time after event will be recorded as much as time set by user