User guide

program

Using [Program], adjust frame rate and quality configure recording

program for Continuous, Manual, and Schedule recording.

Select Program to configure frame rate & resolution. For maximum

performance, user can freely allocate the recording resource per

channel. This feature enables the user to lower the recording

performance of each channels and allocate the remaining resources

to raise the recording performance of a specific channel or channels.

Program

There are 9 programs from A to I composing recording quality and resolution per channel.

Channels

Display the channel No.

video

displays entered video resolution and FRP.

Normal Record

Select frame rate per second and quality that are applied for normal video without events.

Event Record

Select frame rate per second and quality that are applied when event occurs. When event occurs DVR starts to record

by the frame rate per second and quality of Event Record.

FPS

FPS (frames per second) users can select 1 to 30fps per second. Max. Frame can be changed according to

the configuration.

Quality

This configures the recording quality. Value of Q can be configured between 1-10. The higher the

number, the better recording quality is.

Record Capacity Usage

Displays the DVR recording quality.

Quick Setting

Apply the same setting for all channels at once.

Frame rate per second and quality cannot be set exceeding the specification of DVR. Please check the specification of DVR first

before setting record.

menu  recording  program