User's Manual

WebEye WebEye B101B101 User’s Guide
14
3. Real time monitoring through Default Viewer
At default viewer, a user may configure image transmission method and control integrated PTZ mechanism of
a dome camera. The PTZ control panel is activated in some seconds depending on network speed.
On the left side panel, there are menus for changing real time image viewer, accessing administration page,
downloading Plug-in program and viewing information on version and Q&A.
• 720x486 Viewer: By selecting this viewer, a user monitor images of 720 by 486 resolutions. This viewer
has the identically same functions of default viewer but the image panel is bigger by 4 times than that of
default viewer.
• Server Push Viewer: If WebEye B101 or user’s PC is behind firewall on network, a user may monitor
real time image through ‘Server Push Viewer’. Some functions such as ‘Progressive Mode’ image
transmission, ‘Image Quality’ control, and ‘Quality Box’ creation menus out of image control and ‘Preset’,
‘Auto Focus ’, and ‘Focus Sensitivity’ control out of PTZ control are not supported in this viewer.
1) Image control
There are five menus for controlling image transmission method. These menus are not to be activated non-PC
platform such as Macintosh and Unix system.
(1) Gray Mode
If you choose this mode, the images are displayed in black and white. And, you can view the images
transmitted faster than in color image. By click again the button, the function is released.
(2) Progressive Mode
In the case of ‘Progressive Mode’ on, every image is regenerated from low to high resolution. In other words,