User's Manual

WebEye WebEye B101B101 User’s Guide
15
an image is reproduced from vague to clear for user to see what is happening and later one may detect exact
things. This function is useful when you use a low speed network, because it reduces waiting time.
(3) Single Shot Mode
When this button is clicked, one frame of image is reproduced. Therefore, it is stopped transmitting further
image. To resume transmitting real-time i mages, click the button again.
(4) Resolution
You may select a level of resolution among 3 levels (360x243, 180x121, 90x60). High-resolution image is big,
and its transmission speed is slow. You may monitor 720x486 resolution images through ‘720x486 Viewer’.
(5) Frame rate
You may choose image transmission speed. If you choose ‘Fastest’, you can get images at the fastest speed
under your network environment.
2) Integrated PTZ mechanism control
This is to control integrated PTZ mechanism of a dome camera. The control panel is deactivated at first. And
it is to be activated when a user click on ‘Take Control’ button.
(1) Take Control / Give Control
This is to get power of controlling PTZ mechanism of the connected dome camera. A user who is permitted to
control PTZ mechanism may get the power by clicking ‘Take Control’ button.
When the user gets the power, the button is toggled into ‘Give Control’. During the assigned time, a user may
abandon the control power.
(2) Pan/Tilt
In the center of the control panel, there is a plotted space with 4 arrows of up, down, left and right directions.
This is to control pan and tilt mechanism of a dome camera with the mouse. By placing the mouse cursor on
the panel and clicking the left button of a mouse at a certain point of the panel, a dome camera pans and tilts.
(3) Zoom (W/T)
You may zoom in (W: Wide) and zoom out (T: Tele).
(4) Auto Focus
Basically, a dome camera has auto-focus function and it focuses an object automatically. A new object in the
view, however, may not be focused. In the case ‘Auto Focus ’ button is used to send commands to focus
automatically to all objects that appear in the view newly.
(5) Manual Focus (N/F)
You may control zoom mechanism with near (N) and far (F) buttons. This is to optim ize image’s focus.
Focusing sensitivity is set with ‘Focus Sensitivity’ in pop-up menu as well as in administration page.
3) Convenient pop-up menu
A small window of 5 menus appears when you click the right button of the mouse. However only a certain
users who are permitted can utilize the functions such as ‘Image Info’, ‘Quality Box’, ‘Focus Sensitivity’, and
‘Image Quality’. And the results of the four functions are to be affected in every image that is transmitted to
all users. ‘Save File As’ menu is permitted to any user.