User's Manual

WebEye WebEye B101B101 User’s Guide
18
(4) Acceleration Rate
You may choose moving speed of Pan/Tilt/Zoom mechanism among three steps of fast, normal and slow.
3) Pop-up Menu
‘Image Quality’ control, ‘Quality Box’ creation, and ‘Focus Sensitivity’ control are not supported.
(1) Image Info
You may decide the color (black or white) of the information that is shown on the left top of the image. And
you may leave out the information. A user who has ‘Video control’ right may utilize this menu.
(2) Save File As
It is to save a frame of still image as an electric file. A still image can be saved as bitmap (*.bmp) file or
Wavelet format file (*.eye). Wavelet formatted image file is to be reproduced on Internet browsers such as
Netscape Navigator or Internet Explorer as long as the PC is installed Active-X or Plug-in program.
4) To Home
This is to go to main viewer. The main viewer is set in administrator’s page.
5) Capture
This is to capture image and save as a file. This menu is the same function as ‘Save File As’ menu.
6) Admin
Clicking ‘Admin’ menu, you go to a login page of administration page. However only the user who has
authority as an administrator can access the page with administrator’s ID and password.
7) Plug-in
As WebEye compresses image with Wavelet algorithm, user needs to install Plug-in program to see
transmitted image through Netscape Navigator on one’s PC. Clicking ‘Netscape Plugin’ menu, a user accesses
a page where to download Plug-in program.
8) FAQ
User may look up information on trouble shooting clicking ‘FAQ’ regarding to installation or running
WebEye.
VII. Configuring Administrator’s Condition at ‘Admin’ page
This page is for administrator. Administrator may control operating status remotely. This page can be
accessed through Setup program by clicking ‘Start Configuration’ button.
1. Administrator Login
1) Accessing through setup program
First you click on MAC address or IP address of WebEye to select a certain one. Then you key in the
administrator’s ID and password (Default ID and password are ‘admin ’), and click ‘Start Configuration’
button in turns. When you click ‘Start Configuration’ button, the setup program automatically connects you to
Admin page of WebEye Homepage.