User's Manual
WebEye WebEye B101B101
User’s Guide
20
There are one administrator’s account and 5 users’ accounts. Account name can be changed.
(2) Password
If you want to open your WebEye to everyone, you may not change default user’s ID and password. However
you should change administrator’s ID and password with unique ones of yours.
(3) Access Rights
Administrator may give or forfeit users’ right of PTZ control and video control. With default setting,
administrator has both right of PTZ control and video control and normal user doesn’t have any right.
3) Network Configuration
This page is to define network type and set
network addresses of WebEye.
(1) DHCP Client Protocol
If administrator activates ‘DHCP Client
Protocol’ menu, all the addresses are going to set
automatically by WebEye detecting them from
DHCP server of your ISP. The detected
addresses are not seen on the screen.
(2) Select Network Interface
If WebEye is connected on xDSL line that needs
PPPoE process, administrator should select
‘xDSL (PPPoE)’. However the xDSL line
doesn’t need PPPoE process, administrator
should select ‘Ethernet’ though WebEye is
connected on xDSL line.
(3) Ethernet Interface
Administrator may configure IP address, subnet mask, broadcast address, gateway address, and DNS
addresses of WebEye. For broadcast address, administrator may set it automatically by clicking ‘Get From
Netmask’ button after assigning IP address and subnet mask.
MTU Size: Depending on network type, administrator may set data packet size with this menu to utilize the
network at most effectively.
DNS Server IP Address: This is used when you register your WebEye B101 on dynamic IP registration list
of WRS (WebEye Registration Server). WRS has its domain name of ‘webeye.to’ and the domain name is
registered on DNS servers on the world.
(4) xDSL Interface
If WebEye is connected on xDSL line and needs PPPoE process, administrator should select ‘xDSL (PPPoE)’
and configure ID and password for PPPoE. ID and password may be acquired from the ISP that installed the
line. And WebEye may get IP address when it is connected on xDSL line.