User's Manual

WebEye WebEye B101B101 User’s Guide
23
7) Video Configuration
This page is to configure every channel with
various conditions.
(1) Video Channel State Control
Administrator decides whether to utilize video
signal from selected channel in WebEy e or not.
If user disables a channel with an external
camera connecting to WebEye, WebEye does
not show any image from the channel.
(2) Camera Color Type
It is to define every camera whether it is color or B/W camera. This is not to change its original character but
only to define the character and give information to WebEye.
(3) Camera Signal Type
It is to define CCD module of WebEye and external CCD cameras between ‘NTSC’ and ‘PAL’.
(4) Camera Installation Angle
WebEye can always show images in right angle regardless a dome camera’s installation position. If a dome
camera is located on the floor upside down, user can adjust image angel by selecting ’180 deg’.
(5) Advanced Configuration
By Clicking ‘Advanced Configuration’, you may
access the sub page where to configure detailed
conditions.
Calibration Parameters
Administrator manipulates screen settings by
adjusting brightness, contrast, hue, saturation,
horizontal line shift, and vertical line shift from
the menu. With ‘Video Gain ’ menu, you may
optimize the image without adjusting each value
of other menus.
Caption Display Options
Administrator may configure caption on real time
image with display options such as color and
contents. Caption is to be made of time
information, channel information, and additional
explanation (user defined string).
Visual Setting Parameters
Administrator may configure QBOX and image
quality level with aid of real time image. By placing the mouse curse on real time image and clicking the left
button, you may view pop-up menus.
• QBOX Parameters : Administrator sets QBOX area with a mouse to ‘click and drag’. Selected area
shows in ‘Left Top Placement’ and ‘Right Bottom Placement’ panels in figures. With ‘Ambient Level’